| Web Page |
Description |
|
CK0010: pSOS
|
This CodeKit software constains the BSP and related files to run Integrated Systems pSOS+ natively on the Am486® PCI CDP.
|
|
CK0011: EEProm
|
This CodeKit software contains source code to program the Serial EEPROMs used to start up Am79C961 PCnet™-ISA II Ethernet controllers for the Am186™CC CDP and Am186™ES NET186 boards.
|
|
CK0012: USB to UART
|
This CodeKit is a simple USB application for the Am186™CC microcontroller. It receives data on the C endpoint and sends it out on the high-speed UART. It demonstrates how to use both SmartDMA™ and general purpose DMA in the same application.
|
|
CK0013: CPU Speed
|
This CodeKit software demonstrates how to measure CPU frequency.
|
|
CK0014: POTS
|
This CodeKit contains source code to configure and monitor the POTS interface on Am186™CC microcontroller CDPs (with ISDN Daughter Card) and Routers. Drivers for the DSLAC, SLICS, AM79C32, DTMF decoders and Am186CC microcontroller are provided.
|
|
CK0015: TIP Ethernet Driver
|
This CodeKit software contains source code to drive the Am79C961A Ethernet controller on the TIP II. This driver runs the TIP II Ethernet controller in Slave mode with an 8-bit data bus, in a polled mode fashion.
|
|
CK0016: Élan™SC400 NMI
|
This CodeKit software contains sample code for handling NMIs on the Élan™SC400 microcontroller.
|
|
CK0017: Élan™SC400 IrDA
|
This CodeKit describes a work-around for using the Élan™SC400 IrDA port under Windows 95/98.
|
|
CK0018: USB
|
This CodeKit software contains sample firmware and host drivers to using the Am186™CC microcontroller to add two virtual serial ports to a Windows® 98 machine.
|
|
CK0019: Packet Monitor
|
This CodeKit software implements a simple Ethernet packet monitor.
|
